Linux Forums - Linux Help,Advice & support community:LinuxSolved.com
Network Troublshooting => General Networking Support in Linux => Topic started by: Jayaraj on August 18, 2004, 01:31:44 PM
-
I have loaded REDHAT 9.0,when i am conneting using nfs i could not connect.It is saying rpc time out......
-
check whether ur portmap service running properly.
go thru /var/log/messages file for more details error reasons.
grep lines related to nfs .
-
i have same problem with nfs
it gives not mounting server reason given is server cannot given permission
-
HI dear
Check ur /etc/exports file..
If its a permission error then it must be of /etc/exports file
Send me the contents of /etc/exports file, then i will guide you
Enjoy
Gaurav
-
hi i will sending the content of my /etc/export file
#/opt/ltsp 192.168.0.0/255.255.255.0(ro,sync,no_root_squash)
#/var/opt/ltsp/swapfiles 192.168.0.0/255.255.255.0(rw,async,no_root_squash)
## LTSP-begin ##
#
# The lines between 'LTSP-begin' and 'LTSP-end' were added
# on: Sat Apr 30 07:09:07 2005, by the ltspcfg configuration tool.
# For more information, visit the LTSP homepage
# at http://www.LTSP.org
#
/opt/ltsp 192.168.0.0/255.255.255.0(ro,no_root_squash,sync)
/var/opt/ltsp/swapfiles 192.168.0.0/255.255.255.0(rw,no_root_squash,async)
## LTSP-end ##
-
Hi Gaurav
I was done following trouble shooting related to NFS
rpcinfo -p 192.168.0.200
program vers proto port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100024 1 udp 1024 status
100024 1 tcp 1025 status
this is on my server where 192.168.0.200 is my client
But when i run linux terminal server project on client machine it gives my following error
RPC mount failure
Not mounted /opt/ltsp:192.168.0.199 on /mnt/ of client machine
Reason given by server Permission Denied
Please if you have any solution help
-
when i give following cmd on server it gives me following error
[root@ws199 root]#showmount 192.168.0.200
mount clntudp_create: RPC: Program not registered
-
Hi TO ALL,
DO ONE THING , TRY THIS IN ALL OF YOUR MACHINES, THEN TELL WHEATHER THIS RUNS OR NOT.
Suppose u want to share /home dir of ur m/c then
open /etc/exports file
/home 192.168.2.180(rw)
save this file
restart the services as:
#service portmap restart
#service nfs restart
After that go to ur client (ip-192.168.2.180)
give following command there as
#mount 192.168.2.182:/home /mnt
{ where 192.168.2.182 is ip-address of ur NFS server}
after that go to /mnt directory of client -mc
& check its contents
it willl work definitly
Enjoy
Gaurav
-
hi guarav
My client boot from floppy it is a diskless client so how can i do the mount command on this
-
Hi
I haven't worked on diskless clients but acc to me its same command
Regards
Gaurav
-
hi guarava
thanks for your support
can you send some documentation for nfs i.e. PDF or online linux books on NFS
-
Check
http://www.siliconvalleyccie.com/linux-adv/nfs.htm
Enjoy
Gaurav
-
hi gaurav
I have two system both installed with linux server
on having DNS server
and my pc i.e my server is having DHCP,NFS,FTP, and other
my one server ip is 192.168.0.x
my another server ip is 192.168.0.199
my client ip is 192.168.200
my /etc/resolve.conf is following content
nameserver 192.168.0.254
my client machine having following
nameserver 192.168.0.199
may be b'coz of this its given me DNS forward doesn't match with DNS backward
can you able to tell me by reading this
-
I didn't understand ur previous mail , what u want 2 say??????????????
Gaurav
-
i solved nfs problem by removing
portmap: all
from /etc/hosts.deny
but after this it gives me following error
DNS forward ip doesn't match with DNS backward ip
-
to anyone esspecially gauravbajaj
I tried what you have listed down:
open /etc/exports file
/home 192.168.2.180(rw)
save this file
restart the services as:
#service portmap restart
#service nfs restart
After that go to ur client (ip-192.168.2.180)
give following command there as
#mount 192.168.2.182:/home /mnt
{ where 192.168.2.182 is ip-address of ur NFS server}
but a message error was displayed:
lockd_up: no pids, xx user??
portmap: sendmsg returned error 101
RPC: sendmsg returned error 101
portmap RPC call returned error 101
RPC: sendmsg returned error 101
portmap:RPC call returned error 101
can anyone tell me what is wrong? I am connecting a m/c to linux 9
thanks..