September 26, 2021, 01:30:32 AM

News : LinuxSolved.com Linux Help Community Forum..


Author Topic: modem installation  (Read 4298 times)

Offline vicky

  • New Member
  • Posts: 3
modem installation
« on: May 27, 2004, 07:07:40 PM »
I have installed red hat 9. Have an internal Dlink 560IS+ modem with SM56 Motorola Chipset. Help needed for detedtion and installing..

My output for -> cat /proc/pci is below...

PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 2).
Bus 0, device 2, function 0:
VGA compatible controller: Intel Corp. 82815 CGC [Chipset Graphics Controller] (rev 2).
IRQ 11.
Prefetchable 32 bit memory at 0xe0000000 [0xe3ffffff].
Non-prefetchable 32 bit memory at 0xe4100000 [0xe417ffff].
Bus 0, device 30, function 0:
PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 2).
Master Capable. No bursts. Min Gnt=6.
Bus 0, device 31, function 0:
ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 2).
Bus 0, device 31, function 1:
IDE interface: Intel Corp. 82801AA IDE (rev 2).
I/O at 0xf000 [0xf00f].
Bus 0, device 31, function 2:
USB Controller: Intel Corp. 82801AA USB (rev 2).
IRQ 11.
I/O at 0xd000 [0xd01f].
Bus 0, device 31, function 3:
SMBus: Intel Corp. 82801AA SMBus (rev 2).
IRQ 5.
I/O at 0x5000 [0x500f].
Bus 0, device 31, function 5:
Multimedia audio controller: Intel Corp. 82801AA AC'97 Audio (rev 2).
IRQ 5.
I/O at 0xd400 [0xd4ff].
I/O at 0xd800 [0xd83f].
Bus 1, device 2, function 0:
Communication controller: Analog Devices SM56 PCI modem (rev 0).
IRQ 9.
Master Capable. Latency=32. Min Gnt=1.Max Lat=255.
Prefetchable 32 bit memory at 0xe4000000 [0xe40000ff].