Linux Software > Linux Installation Support

installing ubuntu on the netra x1 cd-rom and harddrive

<< < (3/3)

hxcxk:
     lqqqqqqqqqqqqqqqqqu [!!] Detect and mount CD-ROM tqqqqqqqqqqqqqqqqqqk     
     x                     Installation step failed                      x     
     x An installation step failed. You can try to run the failing item  x     
     x again from the menu, or skip it and choose something else. The    x     
     x failing step is: Detect and mount CD-ROM                          x     
     x                                                                   x     
     x                            <Continue>                             x     
     x                                                                   x     
     mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj     
                                                                               
                                                                               
                                                                               
                                                                               
                                                                               
                                                                               
                                                                               
<Tab> moves between items; <Space> selects; <Enter> activates buttons
************************************************************
So it failes and i dont know why.....

.:see Next Post:.

hxcxk:
So My Problem is that it wont see the Drive, if you select "RESCUE"
From the Bot option step if will run you with the same steps and you get to a menu that asks you to select a " CD-ROM DRIVER "

To Fix This I used an External CD-ROM drive but when it cane to actually installing the base software SLIO does not find the 
Hard Drive that is connected to IDE@0 and should be /dev/hda

Im Going to try and use both a USB Device for the HDD and CD-ROM and see if when I connect it up via IDE it works..

Does ANYONE KNOW THE SETTINGS OR THE RIGHT WAY TO INSTALL " Ubuntu "
ON A Sun Netra X1 (UltraSPARC-IIe 500MHz), No Keyboard
OpenBoot 4.0, 128 MB memory installed.

THIS SYSTEM HAS NO HARDWARE ISSUES, BOX WORKS JUST FINE WITH MANNY OTHER OPERATING SYSTEMS.

IF YOU KNOW WHAT TO DO PLEASE MAKE A "STEP-BY-STEP" AT THE BOTTOM OF THIS POST!
THANKS!!!!

--
--
Andy - 559-492-9569
HxCxk.

Navigation

[0] Message Index

[*] Previous page