October 24, 2021, 04:11:43 AM

News : LinuxSolved.com Linux Help Community Forum..


Author Topic: Install intel 82551QM 1000Mb Lan Card linux  (Read 6086 times)

Offline behpaz

  • New Member
  • Posts: 1
Install intel 82551QM 1000Mb Lan Card linux
« on: December 29, 2008, 02:50:04 PM »
Hi Dear Friends
i have a promblem and i dont know how to install new lan card in linux redhat 9 kernel 2.4.20-8
i have 4 network card nomer of 2 intel 82541PI and 2 intel 82551QM 10/100/1000Mb
when i install linux the os recognized the 82541PI as a fast ethernet  but dont recognized giga ethernet and i dont see any item too add new hardware, i see meny meny of lan card in preinsatll lan card in driver list but my lan card there is not. i have Driver of lan e1000-7.6.5.tar.
can you help me to install my lan card?

Meny Thanks
Behzad

Offline Ricky

  • LST CareTaker
  • Specially Skilled
  • *****
  • Posts: 2381
Re: Install intel 82551QM 1000Mb Lan Card linux
« Reply #1 on: December 30, 2008, 06:49:13 AM »
Mostly drivers comes with installation instruction, I advice you to decompress e1000-7.6.5.tar and look for file install or readme or similar for installation instruction of this specific driver.

Offline unixmen

  • Linux Noob !
  • *
  • Posts: 24
Re: Install intel 82551QM 1000Mb Lan Card linux
« Reply #2 on: January 06, 2009, 01:20:30 PM »
# Unpack the file in tmp
cd /tmp
bunzip2 e1000-7.6.5-i386-bin-1a.tar.bz2
tar xf e1000-7.6.5-i386-bin-1a.tar
cd e1000-7.6.5-i386-bin-1a

# This does a dry run and will tell you what it will do.
./install.sh -n

# This runs it as root and will do the installations.
sudo ./install.sh

# Load the new driver and restart networking
modprobe e1000
sudo /etc/init.d/networking restart
This command will add e1000 explicitly in your /etc/modules file in order to get the updated e1000 driver to load at boot. You only need to run this for the first installation. If you install the 2.6.20-16 version later, then you should omit this in the second installation.
Code:

echo "e1000" | sudo tee -a /etc/modules

That's it. You are done for the 2.6.22-X-generic kernel.

Install the second file e1000-7.6.5-i386-bin-1b.tar.bz2 in the same way after you have installed the 2.6.20-16 upgrade (which you will get automatically soon after your network is running).


please  let  me  know  of  it  works of post me the  errors  on website
Regards
www.unximen.net  Team