Linux Forums - Linux Help,Advice & support community:LinuxSolved.com

Network Troublshooting => General Networking Support in Linux => Topic started by: nkhetia on July 01, 2005, 09:02:39 AM

Title: too much work at interrupt, intrstatus=0x0001
Post by: nkhetia on July 01, 2005, 09:02:39 AM

Hi all,

i m having linux 8 box with squid proxy and nating.

since last few days, i m facing one error as follows;

"too much work at interrupt, intrstatus=0x0001"

can anybody tell me the reason for this error and also the
solution..?  

thanks in advance..

regards

nilesh

Title: too much work at interrupt, intrstatus=0x0001
Post by: Ricky on July 01, 2005, 05:19:33 PM

I am amazed. i remember that I had replied it already. hmm.. may be some problem ..

Ok this is not the problem with your system, it is due to buggy driver for realtek chipset based nic.

Solution can be two.. 1. Either try different driver for your NIC .. i mean diff. realtek driver.
or
2. Change your NIC.

Title: thanks.. Ricky
Post by: nkhetia on July 07, 2005, 08:05:11 AM

Hey Ricky

I 've changed NIC.. then also problem was there..
After that i upgraded driver .. so problem is solved.

now i have 2 full duplex card in my linux box.. how to utilise them most?
and how to check their performance?

thanks a lot .. (as usual)  :lol:

best regards

nilesh