Linux Forums - Linux Help,Advice & support community:LinuxSolved.com
Hardware Troubleshooting in Linux => Other Devices => Topic started by: dred on July 25, 2004, 10:35:25 AM
-
hi everybody
i'm running rh9, but i cann"t get my usb stick mounted
i run the
tail -f /var/log/messages , i plugged the usb stick but nothing shows
can anyone tell me howto resolve the probleme
:(
-
Man.. see this post Mounting flash device (http://www.linuxsolved.com/forums/ftopic130.html) See all views. u will find for u also
-
thanks , but i already read this, i went throught the steps, but when i tries to mount it , it says:
mount : /dev/sda1 is not a valid block device
i also repeat that when i plug it , the tail -f /var/log/messages dosent show anything!!!!
-
hi,
may i know which kernel you are using?
jeeva
-
not a valid block device means, ur usb stik is not connected correctly sometimes. I got the same error in my Knoppix when I used my 32mb stick , pretty old.
-
OK dear,
change ur USB port, Reconnect ithe USB drive ,mind it do all these in ur command prompt only
When u connect it to ur port then automatically it detects the driver which it will show on the screen
So i think ur USB port is not ok change it, or give this commnd
#mount /dev/sda2 /mnt
may be it mounted on /dev/sda2
After that it will work
Enjoy
Gaurav