Linux Forums - Linux Help,Advice & support community:LinuxSolved.com
Hardware Troubleshooting in Linux => Other Devices => Topic started by: mohitmoudgil on May 24, 2004, 11:13:27 AM
-
Sir
I have a Relience LST 250 i.e a blue and white terminal offered by releince .Now my problem is that i am unable to use internet on Fedora Core 1 Linux(already tested on various other distros) , as there are no drivers for linux accompained with it.I have searched whole of the internet but i could only find tutorials to use relience mobile phone but what i have is not mobile phone.
Plz help me out
Thanks in advance
Mohit
-
well there is command line software available on reliance website.. did u tried that ?
-
can u tell me the link
-
relianceinfo.com/Infocomm/html/rservices/rservices_linux_rconnect.html
-
You can also see this page Reliance phone in Linux (http://www.linuxsolved.com/forums/ftopic612.html)
-
Sir
it is still not working.When i use the reliance command line tool i recieve the error message "Modem Not found".I have already activated the phone.
-
Here is what I found.Please try and see.
I use wvdial instead of the official client for connecting to the Net using the FWP. I have tried to use kppp for this purpose, and have got very little success. The rest of this section explains how to connect using wvdial.
--------------------------------------------------------------------------------
I used stty /dev/ttyS0 115200 (replace the port with the one you are using) to set the speed of the port to be used. You might not need it.
--------------------------------------------------------------------------------
In /etc/ppp/options I have:
lock
asyncmap 0
crtscts
modem
defaultroute
usepeerdns
name reliance
noauth
mtu 264
debug
In /etc/ppp/pap-secrets I have:
"XXXXXXXXXX" reliance "XXXXXXXXXX"
Where XXXXXXXXXX is my phone number in the form STD-code + phonenumber. e.g. a Delhi(STD code 011) phone number YYYYYYYY, should have 11YYYYYYYY in the place of XXXXXXXXXX above.
In /etc/wvdial.conf I have:
[Dialer Defaults]
Modem = /dev/ttyS0
Baud = 115200
Init1 = AT+crm=1;$LGPKT=3
ISDN = 0
Modem Type = Analog Modem
Phone = #777
Username = XXXXXXXXXX
Password = XXXXXXXXXX
Stupid Mode = 1
Remember to use the phone number in the format explaned earlier in place of XXXXXXXXXX in the file given above.
Run wvdial as root to connect to the net, or alternatively give sudo permission to specific users to run wvdial using their own accounts.
-
Sir
it is still not working.When i use the reliance command line tool i recieve the error message "Modem Not found".I have already activated the phone.
Just check your cable !!