Linux Forums - Linux Help,Advice & support community:LinuxSolved.com
Linux in General => Linux Development & Programming => Topic started by: tomamodi on December 08, 2005, 07:16:32 AM
-
DEAR
I always hit by unclean shutdown
because i am using my squid box without keyboard nad monitor
so is it possible to put the fsc2k on every boot automatic
some where in rc.d/local
that every time after shut down when box start it jernold the directries
or any other way for coop this problem
thank you
-
well.. u can check the hd for errors and can repair using
fsck -t ext3 /dev/hda1
but u need to umout the hdd first in order to check it properly.
either u can add following in startup script ...
umount /dev/hda1
fsck -t /dev/hda1
mount /dev/hda1
but I am not sure about it works or not but you can try it . btw.. here it will first umount the /dev/hda1 and then check and repair for errors and then again remount it.
-
but i try 20 times the commercial cache -by unclean shut down -it start normal - it never get any error like my own cache
problem is the cache i have is without any monitor or any i/o device l
so need some thing automaticaly cares that unclean shut down
-
but i try 20 times the commercial cache -by unclean shut down -it start normal - it never get any error like my own cache
What do exactly mean by the errors you get in your cache ?
-
but i try 20 times the commercial cache -by unclean shut down -it start normal - it never get any error like my own cache
error unclean shut down
and kernel panic
after two three unclean shut down
-
RICKY
please give some information about this command what it means
sleep 1
done > /dev/null 2>&1 &
meaning of this command
thanks