I don't have ur email id , mail me

I am unable to start X , when i run startx it gives following error :

Could not init font path element unix/:7100, removing from list!

Fatal server error:
could not open default font 'fixed'

Hi,

What are the different versions of Linux available right from begining till date are basic comparisons between these versions. Please in detail if possible

Check

/etc/X11/XF86config for video settings and try changing to lower resolution

How can I know the kernel version number and what is the meaning of differnt parts in it.

You can run #setup go to network configuration ad you can set any static ip.

At last problem was solved, what i downloaded from net was the file "e1000-4.3.15.tar.gz" and was not working and then I tried to find the Motherboard drivers cd . The CD contains a file   "e1000-5..0.43.tar.gz" and I was able to successfully install it . It works now.

You can connect as many network you wish, but for each network you must set default gateway from the network itself.

I can give you further solutions if you can explain your problem in detail.

I have downloaded this card drivers from internet e1000-4.3.15.tar.gz  & extracted  it with command
#tar -xvzf e1000-4.3.15.tar.gz
after that
#cd e1000-4.3.15
#make
#make install
till this pt it works but after that when i tried to install modules by giving command:
#insmod e1000
It gives error like this
/usr/lib/kernel/e1000.o no such file & directory

PCI devices found:
  Bus  0, device   0, function  0:
    Host bridge: PCI device 8086:2570 (Intel Corp.) (rev 2).
      Prefetchable 32 bit memory at 0xfe800000 [0xfebfffff].
  Bus  0, device   2, function  0:
    VGA compatible controller: PCI device 8086:2572 (Intel Corp.) (rev 2).
      IRQ 16.
      Prefetchable 32 bit memory at 0xf0000000 [0xf7ffffff].
      Non-prefetchable 32 bit memory at 0xfe780000 [0xfe7fffff].
      I/O at 0xefe0 [0xefe7].
  Bus  0, device   3, function  0:
    PCI bridge: PCI device 8086:2573 (Intel Corp.) (rev 2).
      Master Capable.  Latency=64.  Min Gnt=2.
  Bus  0, device  29, function  0:
    USB Controller: PCI device 8086:24d2 (Intel Corp.) (rev 2).
      IRQ 16.
      I/O at 0xef00 [0xef1f].
  Bus  0, device  29, function  1:
    USB Controller: PCI device 8086:24d4 (Intel Corp.) (rev 2).
      IRQ 19.
      I/O at 0xef20 [0xef3f].
  Bus  0, device  29, function  2:
    USB Controller: PCI device 8086:24d7 (Intel Corp.) (rev 2).
      IRQ 18.
      I/O at 0xef40 [0xef5f].
  Bus  0, device  29, function  3:
    USB Controller: PCI device 8086:24de (Intel Corp.) (rev 2).
      IRQ 16.
      I/O at 0xef80 [0xef9f].
  Bus  0, device  29, function  7:
    USB Controller: PCI device 8086:24dd (Intel Corp.) (rev 2).
      IRQ 23.
      Non-prefetchable 32 bit memory at 0xfe77bc00 [0xfe77bfff].
  Bus  0, device  30, function  0:
    PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 194).
      Master Capable.  No bursts.  Min Gnt=2.
  Bus  0, device  31, function  0:
    ISA bridge: PCI device 8086:24d0 (Intel Corp.) (rev 2).
  Bus  0, device  31, function  1:
    IDE interface: PCI device 8086:24db (Intel Corp.) (rev 2).
      IRQ 18.
      I/O at 0xfc00 [0xfc0f].
      Non-prefetchable 32 bit memory at 0x10000000 [0x100003ff].
  Bus  0, device  31, function  3:
    SMBus: PCI device 8086:24d3 (Intel Corp.) (rev 2).
      IRQ 17.
      I/O at 0x400 [0x41f].
  Bus  0, device  31, function  5:
    Multimedia audio controller: PCI device 8086:24d5 (Intel Corp.) (rev 2).
      IRQ 17.
      I/O at 0xe800 [0xe8ff].
      I/O at 0xee80 [0xeebf].
      Non-prefetchable 32 bit memory at 0xfe77b800 [0xfe77b9ff].
      Non-prefetchable 32 bit memory at 0xfe77b400 [0xfe77b4ff].
  Bus  1, device   1, function  0:
    Ethernet controller: PCI device 8086:1019 (Intel Corp.) (rev 0).
      IRQ 18.
      Master Capable.  No bursts.  Min Gnt=255.
      Non-prefetchable 32 bit memory at 0xfe5e0000 [0xfe5fffff].
      I/O at 0xdf80 [0xdf9f].

Hi team,

I have intel original 865 chipset based system. When i install linux it does'nt detect network card. If windows xp is installed on the same hardware it shows "Intel(R) Pro/1000 CT Network Connection" as network adapter. I have downloaded driver for linux but it didn't work. PLEASE HELP ME.

Hello,

Can anybody tell me the difference between ext2 and ext3

   Recommend LS
   Linux User Around