next »

[gauravmittal_ec]

Hello Everyvody..
I have LSP 350T Tata Indicom phone connected through USB cable..
and I am using Fedora Core 5 (Linux)
I have connected to internet only once when I follow the procedure by editing the wvdial.conf file..
but now it is not connecting ..what's the reason behind it :?:
Can any body tell me :!:

[Ricky]

You have to goto  /var/log
And provide us the log messages.

[gauravmittal_ec]

thanku sir for responding me
below are the log messages (i am not disclosing the ip addresses)


Nov 12 01:33:16 localhost pppd[2760]: pppd 2.4.3 started by root, uid 0
Nov 12 01:33:16 localhost pppd[2760]: Using interface ppp0
Nov 12 01:33:16 localhost pppd[2760]: Connect: ppp0 <--> /dev/ttyACM0
Nov 12 01:33:36 localhost pppd[2760]: CHAP authentication succeeded: Authentication success
Nov 12 01:33:39 localhost pppd[2760]: local  IP address "not disclosed"
Nov 12 01:33:39 localhost pppd[2760]: remote IP address "not disclosed"
Nov 12 01:33:39 localhost pppd[2760]: primary DNS address "not disclosed"
Nov 12 01:33:39 localhost pppd[2760]: secondary DNS address "not disclosed"
Nov 12 01:34:28 localhost pppd[2760]: Terminating on signal 15
Nov 12 01:34:28 localhost pppd[2760]: Connect time 0.9 minutes.
Nov 12 01:34:28 localhost pppd[2760]: Sent 80 bytes, received 96 bytes.

[Ricky]

I really found something useful for u..
here u can check everything .. from authentiation type to  problems etc..

theory.physics.ubc.ca/ppp-linux.html

read that peacefully and let me know if that was helpful.

[Abhinav]

Hi,
    you don't have to do anything if you have kde and Kinternet installed
   open terminal and give commands
#modprobe usbserial
#modprobe cdc-acm
#modprobe ftdi_sio
    After that connect the phone to your USB cable (don't plug it before giving commands)

Open yast and configure modem there
port- ttyACM0
init 1=ATZ
init 2=AT+CRM=1
init 3 =

and then finish.
Run Kinternet
Dial in
thats it

   Recommend LS
   Linux User Around