March 29, 2024, 06:01:13 AM

News : LinuxSolved.com Linux Help Community Forum..


Author Topic: Dansguardian problem  (Read 5472 times)

Offline lsantana

  • Linux Noob !
  • *
  • Posts: 26
Dansguardian problem
« on: November 05, 2004, 08:51:08 PM »
I need to restrict the internet access to an ip range, but that range will only have access to one specific site.  I have a standard squid proxy server with dansguardian.  It is possible to do this? If i put the range into the bannediplist, obviously it blocks me the whole access to internet.  I really appreciate if you can help me in this matter.

Thanks

Leo

Offline Ricky

  • LST CareTaker
  • Specially Skilled
  • *****
  • Posts: 2381
Dansguardian problem
« Reply #1 on: November 06, 2004, 07:05:36 AM »
hmm.. squid is very effective internet filtering software also. I suggest you to dig few other post related to this in the forum and I am sure you will find your answer.
PS: you can do all such filtering even without using Dansgaurdian :)

Offline GNUrag

  • Tux Awared
  • **
  • Posts: 41
    • http://tends.ourproject.org/~anurag
Dansguardian problem
« Reply #2 on: November 07, 2004, 11:45:00 AM »
yeah, i squid is effective... that too natively...

Hey Ricky, i added an ACL in squid.conf to look into a file "block.site" for a list of blocked sites ... but the problem is that i dont have a complete list of porn/objectionable sites that should be blocked for network users... is there any other workaround? I haven't gone through squid configuration yet...

Offline LS-Admin

  • Administrator
  • Linux Learner
  • *****
  • Posts: 109
Dansguardian problem
« Reply #3 on: November 07, 2004, 11:56:33 AM »
yaa there is list of porn sites to blocked available on internet .. just use google.com/linux

Offline GNUrag

  • Tux Awared
  • **
  • Posts: 41
    • http://tends.ourproject.org/~anurag
Dansguardian problem
« Reply #4 on: November 08, 2004, 12:03:48 PM »
Wwwhattttt?  see i am serious..... what result would google.com/linux would give ?

Offline lsantana

  • Linux Noob !
  • *
  • Posts: 26
Thank you!
« Reply #5 on: November 08, 2004, 12:42:33 PM »
That's mean i have to take out dansguardian.  I thought it, but really don't want at all.  I will work on it.  So, i must to convince my boss there's no another solution.

By the way, thanks for your help!  
This is the kind of forum the linux people need!!  You're the best!!

Leo

Offline lsantana

  • Linux Noob !
  • *
  • Posts: 26
Another problem!
« Reply #6 on: November 08, 2004, 06:35:41 PM »
I did the content filtering through squid with a complete acl.  I do restrict browsing to an ip range successfully.  The problem began when squid try to load the porn sites list stored in a file of 8mb.  It seems like squid can't handle such large files and it gets too slow trying to load the file and finally it can't be loaded.  Is there any problem in such files??  What kind of files should i use???  Can squid handle large files???

Thanks

Leo

Offline Ricky

  • LST CareTaker
  • Specially Skilled
  • *****
  • Posts: 2381
Dansguardian problem
« Reply #7 on: November 11, 2004, 06:53:25 AM »
well.. i have never implemented porn blocking list in actual office environment, althogh i have used to test squid feature so not sure about handling long list.
BTW  GNUrag you can get list of porn sites from lsantana :)

Offline GNUrag

  • Tux Awared
  • **
  • Posts: 41
    • http://tends.ourproject.org/~anurag
Dansguardian problem
« Reply #8 on: November 11, 2004, 11:37:37 AM »
hmmmm. @lsantana , could you send me that file (compressed) .....

-> gnurag AT gmail DOT com

Offline lsantana

  • Linux Noob !
  • *
  • Posts: 26
Off course
« Reply #9 on: November 15, 2004, 12:35:30 PM »
GNUrag

You can get the complete blacklists at www.urlblacklist.com
This site is just dedicated on these stuffs
So, you can dowload the file in .tar.gz format

Leo