March 19, 2024, 08:40:14 AM

News : LinuxSolved.com Linux Help Community Forum..


Author Topic: installing ubuntu on the netra x1 cd-rom and harddrive  (Read 11956 times)

Offline hxcxk

  • Linux Noob !
  • *
  • Posts: 12
installing ubuntu on the netra x1 cd-rom and harddrive
« on: November 27, 2009, 09:29:31 PM »
Installing ubuntu on the Netra x1 (Sun MicroSystem)
This is a standard box with all factory parts.

CD-ROM and HARD DRIVE are not found by the installer,
BUT ARE FOUND in the console before I boot off the cd-rom.
Ill first set the cdrom to boot with the command " setenv boot-device cdrom " From the console

*****************************
Console - Action - set cdrom to boot
*****************************
ok setenv boot-device cdrom
boot-device =         cdrom
ok
ok
*****************************

.:See Next post:.





Offline hxcxk

  • Linux Noob !
  • *
  • Posts: 12
Re: installing ubuntu on the netra x1 cd-rom and harddrive
« Reply #1 on: November 27, 2009, 09:43:22 PM »
************************************************
Action-Boot from CD-ROM to load
************************************************
Sun Netra X1 (UltraSPARC-IIe 500MHz), No Keyboard
OpenBoot 4.0, 128 MB memory installed, Serial #51111469.
Ethernet address 0:3:ba:b:e6:2d, Host ID: 830be62d.



Executing last command: boot device cdrom                             
Boot device: /pci@1f,0/ide@d/cdrom@2,0:f  File and args: device cdrom
************************************************
Boot device: /pci@1f,0/ide@d/cdrom@2,0:f [This line tells me that it sees the drive on the IDE as the secondary slave (ide@d) and is Drive Letter "F"
The Box sees the CD-Rom and boots off the cd next

.:see Next Post:.


Offline hxcxk

  • Linux Noob !
  • *
  • Posts: 12
Re: installing ubuntu on the netra x1 cd-rom and harddrive
« Reply #2 on: November 27, 2009, 09:46:02 PM »
*******************************************
ACTION-BOOT OFF CD AND START SILO TO LOAD LINIX
*******************************************
Sun Netra X1 (UltraSPARC-IIe 500MHz), No Keyboard
OpenBoot 4.0, 128 MB memory installed, Serial #51111469.
Ethernet address 0:3:ba:b:e6:2d, Host ID: 830be62d.



Executing last command: boot device cdrom                             
Boot device: /pci@1f,0/ide@d/cdrom@2,0:f  File and args: device cdrom
SILO Version 1.4.14
\


                       Welcome to Ubuntu jaunty!

This is an Ubuntu installation CDROM, built on 20090423.
Keep it once you have installed your system, as you can boot from it
to repair the system on your hard disk if that ever becomes necessary.

WARNING: You should completely back up all of your hard disks before
  proceeding. The installation procedure can completely and irreversibly
  erase them! If you haven't made backups yet, remove the rescue disc
  from the drive and press L1-A to get back to the OpenBoot prompt.

Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
applicable law.

[ ENTER - Boot install ]   [ Type "rescue" - Boot into rescue mode ]

Your imagename `device' and arguments `cdrom' have either wrong syntax,
or describe a label which is not present in silo.conf
Type `help' at the boot: prompt if you need it and then try again.
boot:
*******************************************





.:sEE nEXT pOST:.

Offline hxcxk

  • Linux Noob !
  • *
  • Posts: 12
Re: installing ubuntu on the netra x1 cd-rom and harddrive
« Reply #3 on: November 27, 2009, 10:03:34 PM »
ok so the system booted off the CD-ROM thats connected to the second IDE cable thats in the box, now im going to start the installer.
*******************************************
Action-Hit "ENTER" to boot:
Action-Choose Language to install

*******************************************

  lqqqqqqqqqqqqqqqqqqqqqqqqu [!!] Choose language tqqqqqqqqqqqqqqqqqqqqqqqqqk   
  x                                                                         x   
  x Please choose the language used for the installation process. This      x   
  x language will be the default language for the final system.             x   
  x                                                                         x   
  x Choose a language:                                                      x   
  x                                                                         x   
  x                               C                                         x   
  x                               English                                   x   
  x                                                                         x   
  x     <Go Back>                                                           x   
  x                                                                         x   
  mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj   
                                                                               
                                                                               
                                                                               
                                                                               
                                                                               
<Tab> moves between items; <Space> selects; <Enter> activates buttons           


*******************************************

I selecten English and goes to the next page.

.:See Next Post:.


Offline hxcxk

  • Linux Noob !
  • *
  • Posts: 12
Re: installing ubuntu on the netra x1 cd-rom and harddrive
« Reply #4 on: November 27, 2009, 10:05:22 PM »
*******************************************
Action-Select Language
*******************************************
                                                                               
  lqqqqqqqqqqqqqqqqqqqqqqqqu [!!] Choose language tqqqqqqqqqqqqqqqqqqqqqqqqqk   
  x                                                                         x   
  x Based on your language, you are probably located in one of these        x   
  x countries or regions.                                                   x   
  x                                                                         x   
  x Choose a country, territory or area:                                    x   
  x                                                                         x   
  x                            Hong Kong                                    x   
  x                            India           a                            x   
  x                            Ireland         a                            x   
  x                            New Zealand     a                            x   
  x                            Nigeria         a                            x   
  x                            Philippines     a                            x   
  x                            Singapore       a                            x   
  x                            South Africa                                 x   
  x                            United Kingdom  a                            x   
  x                            United States                                x   
  x                                                                         x   
  x     <Go Back>                                                           x   
  x                                                                         x   
  mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj   
                                                                               
<Tab> moves between items; <Space> selects; <Enter> activates buttons   
*******************************************

Select "United States" and hit enter to go to the next page
.: See Next Post:.

Offline hxcxk

  • Linux Noob !
  • *
  • Posts: 12
Re: installing ubuntu on the netra x1 cd-rom and harddrive
« Reply #5 on: November 27, 2009, 10:08:52 PM »
Next step is to select your KB type
***********************************
Action-Select KB
***********************************
                                                                               
  lqqqqqqqqqqqqqqqqqqqu [!!] Ubuntu installer main menu tqqqqqqqqqqqqqqqqqqqk   
  x                                                                         x   
  x Keyboard model:                                                         x   
  x                                                                         x   
  x  Dell SK-8135                                                           x   
  x  Dell USB Multimedia Keyboard                                       a   x   
  x  Dexxa Wireless Desktop Keyboard                                    a   x   
  x  Diamond 9801 / 9802 series                                         a   x   
  x  Do not configure keyboard; keep kernel keymap                          x   
  x  Ennyah DKB-1008                                                    a   x   
  x  Evdev-managed keyboard                                             a   x   
  x  Everex STEPnote                                                    a   x   
  x  Fujitsu-Siemens Computers AMILO A1667G laptop                      a   x   
  x  Generic 101-key PC                                                 a   x   
  x  Generic 102-key (Intl) PC                                          a   x   
  x  Generic 104-key PC                                                 a   x   
  x  Generic 105-key (Intl) PC                                              x   
  x                                                                         x   
  x     <Go Back>                                                           x   
  x                                                                         x   
  mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj   
                                                                               
<Tab> moves between items; <Space> selects; <Enter> activates buttons 
******************************************************************

Because of the Fact the you talk to the box via RS-232  and use a termal (vt100)

I select "  x  Do not configure keyboard; keep kernel keymap                          x "

(9600-8-n-1 comm settings)

.: See Next Post:.


Offline hxcxk

  • Linux Noob !
  • *
  • Posts: 12
Re: installing ubuntu on the netra x1 cd-rom and harddrive
« Reply #6 on: November 27, 2009, 10:14:58 PM »
     ***************************************************************                                                                         
   lqqqqqqqqqqqqqqqqqqqu [!!] Detect and mount CD-ROM tqqqqqqqqqqqqqqqqqqqqk   
   x                                                                       x   
   x No common CD-ROM drive was detected.                                  x   
   x                                                                       x   
   x You may need to load additional CD-ROM drivers from removable media,  x   
   x such as a driver floppy. If you have such media available now, insert x   
   x it, and continue. Otherwise, you will be given the option to manually x   
   x select CD-ROM modules.                                                x   
   x                                                                       x   
   x Load CD-ROM drivers from removable media?                             x   
   x                                                                       x   
   x     <Yes>                                                    <No>     x   
   x                                                                       x   
   mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj   
                                                                               
                                                                               
                                                                               
                                                                               
<Tab> moves between items; <Space> selects; <Enter> activates buttons           

*****************************************************************

If you  are using a USB CD_ROM select (YES)
If you use a IDE drive connected  via IDE select (NO)

Im selecting NO.

.:See Next Post:.

Offline hxcxk

  • Linux Noob !
  • *
  • Posts: 12
Re: installing ubuntu on the netra x1 cd-rom and harddrive
« Reply #7 on: November 27, 2009, 10:18:03 PM »
                                                                               
   lqqqqqqqqqqqqqqqqqqqu [!!] Detect and mount CD-ROM tqqqqqqqqqqqqqqqqqqqqk   
   x                                                                       x   
   x No common CD-ROM drive was detected.                                  x   
   x                                                                       x   
   x Your CD-ROM drive may be an old Mitsumi or another non-IDE, non-SCSI  x   
   x CD-ROM drive. In that case you should choose which module to load and x   
   x the device to use. If you don't know which module and device are      x   
   x needed, look for some documentation or try a network installation     x   
   x instead of a CD-ROM installation.                                     x   
   x                                                                       x   
   x Manually select a CD-ROM module and device?                           x   
   x                                                                       x   
   x     <Yes>                                                    <No>     x   
   x                                                                       x   
   mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj   
                                                                               
                                                                               
                                                                               
                                                                               
<Tab> moves between items; <Space> selects; <Enter> activates buttons   

**************************************************************
The Installer now askes you if you would like to select the CD_ROM module and decice so select yes.
.:See Next Post:.

Offline hxcxk

  • Linux Noob !
  • *
  • Posts: 12
Re: installing ubuntu on the netra x1 cd-rom and harddrive
« Reply #8 on: November 27, 2009, 10:19:37 PM »
 lqqqqqqqqqqqqqqqqqqqqu [!!] Detect and mount CD-ROM tqqqqqqqqqqqqqqqqqqqqqk   
  x                                                                         x   
  x The automatic detection didn't find a CD-ROM drive. You can try to      x   
  x load a specific module if you have a unusual CD-ROM drive (that is      x   
  x neither IDE nor SCSI).                                                  x   
  x                                                                         x   
  x Module needed for accessing the CD-ROM:                                 x   
  x                                                                         x   
  x                                none                                     x   
  x                                cdrom                                    x   
  x                                                                         x   
  x                                                                         x   
  x                                                                         x   
  mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj   
                                                                               
                                                                               
                                                                               
                                                                               
<Tab> moves between items; <Space> selects; <Enter> activates buttons

****************************************************************
Select CD-ROM module and continue to the next screen
.:See Next Post:.

Offline hxcxk

  • Linux Noob !
  • *
  • Posts: 12
Re: installing ubuntu on the netra x1 cd-rom and harddrive
« Reply #9 on: November 27, 2009, 10:21:46 PM »
   lqqqqqqqqqqqqqqqqqqqu [!!] Detect and mount CD-ROM tqqqqqqqqqqqqqqqqqqqqk   
   x                                                                       x   
   x In order to access your CD-ROM drive, please enter the device file    x   
   x that should be used. Non-standard CD-ROM drives use non-standard      x   
   x device files (such as /dev/mcdx).                                     x   
   x                                                                       x   
   x You may switch to the shell on the second terminal (ALT+F2) to check  x   
   x the available devices in /dev with "ls /dev". You can return to this  x   
   x screen by pressing ALT+F1.                                            x   
   x                                                                       x   
   x Device file for accessing the CD-ROM:                                 x   
   x                                                                       x   
   x /dev/cdrom___________________________________________________________ x   
   x                                                                       x   
   x                              <Continue>                               x   
   x                                                                       x   
   mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj   
                                                                               
                                                                               
                                                                               
<Tab> moves between items; <Space> selects; <Enter> activates buttons 
************************************************************
I now tell the installer the device file for accessing the CD-ROM
I put in
"/dev/cdrom"
and select continue to the next screen

.:See Next Post:.

Offline hxcxk

  • Linux Noob !
  • *
  • Posts: 12
Re: installing ubuntu on the netra x1 cd-rom and harddrive
« Reply #10 on: November 27, 2009, 10:23:09 PM »
     lqqqqqqqqqqqqqqqqqu [!!] Detect and mount CD-ROM tqqqqqqqqqqqqqqqqqqk     
     x                     Installation step failed                      x     
     x An installation step failed. You can try to run the failing item  x     
     x again from the menu, or skip it and choose something else. The    x     
     x failing step is: Detect and mount CD-ROM                          x     
     x                                                                   x     
     x                            <Continue>                             x     
     x                                                                   x     
     mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj     
                                                                               
                                                                               
                                                                               
                                                                               
                                                                               
                                                                               
                                                                               
<Tab> moves between items; <Space> selects; <Enter> activates buttons
************************************************************
So it failes and i dont know why.....

.:see Next Post:.

Offline hxcxk

  • Linux Noob !
  • *
  • Posts: 12
Re: installing ubuntu on the netra x1 cd-rom and harddrive
« Reply #11 on: November 27, 2009, 10:33:01 PM »
So My Problem is that it wont see the Drive, if you select "RESCUE"
From the Bot option step if will run you with the same steps and you get to a menu that asks you to select a " CD-ROM DRIVER "

To Fix This I used an External CD-ROM drive but when it cane to actually installing the base software SLIO does not find the 
Hard Drive that is connected to IDE@0 and should be /dev/hda

Im Going to try and use both a USB Device for the HDD and CD-ROM and see if when I connect it up via IDE it works..

Does ANYONE KNOW THE SETTINGS OR THE RIGHT WAY TO INSTALL " Ubuntu "
ON A Sun Netra X1 (UltraSPARC-IIe 500MHz), No Keyboard
OpenBoot 4.0, 128 MB memory installed.

THIS SYSTEM HAS NO HARDWARE ISSUES, BOX WORKS JUST FINE WITH MANNY OTHER OPERATING SYSTEMS.

IF YOU KNOW WHAT TO DO PLEASE MAKE A "STEP-BY-STEP" AT THE BOTTOM OF THIS POST!
THANKS!!!!

--
--
Andy - 559-492-9569
HxCxk.