May 22, 2019, 08:56:46 AM

News : Linux Help Community Forum..

Author Topic: Solution:How to Install Ati Radeon installation on Fedora Core 5+  (Read 4572 times)

Offline kouji108

  • New Member
  • Posts: 2
hi all LinuxSolved members..i found this solution for who have a problem with ati card in fedora core must try this:

first you must go to and download livna rpm package that related to you fedora.

then install your package with command like below:

su -c rpm -Uvh <livna rpm package>

test livna configuration with this:

From a shell, run yum info xmms-mp3 if you get an error, livna is not configured properly..try configure again.

if no error so go on..then type this:

su -c 'yum install xorg-x11-drv-fglrx kmod-fglrx glx-utils'

logout of your current session..Once the X-server restarts, log back terminal again and test to verify it working properly or not..type this:

su -c 'glxinfo | grep direct'

If the response is "direct rendering: Yes" you are good to go. If not, a reboot may be required for the full effect of the module to be realized on some machines.

Make sure you are actually using the fglrx note: /usr/lib64 for x86_64 users only.Check against the following output:

ldd /usr/bin/glxinfo | grep libGL => /usr/lib/fglrx/ (0x00548000) => /usr/lib/ (0x00110000)

if output like above its working properly..

« Last Edit: March 09, 2008, 05:06:17 PM by Ricky »

Offline Ricky

  • LST CareTaker
  • Specially Skilled
  • *****
  • Posts: 2381
Re: Solution:How to Install Ati Radeon installation on Fedora Core 5+
« Reply #1 on: March 09, 2008, 05:07:51 PM »
Hi Kouji, it is very nice practice to help others by sharing solutions. I am moving to "How to Section". Hope it will help others in future.
I guess your card was ATI Radeon 2600 pro as you stated in other thread.