September 01, 2014, 06:38:09 PM

News : LinuxSolved.com Linux Help Community Forum..


Recent Posts

Pages: [1] 2 3 ... 10
1
Linux Audio Support / Re: sound problem with suse
« Last post by OnArkTheMoon on August 21, 2014, 03:44:52 AM »

Hopefully there will be some winter. I'll keep my eyes open for a post. Sounds like

fun.
2
Os Talk / Re: Dreckig OS Commands
« Last post by OnArkTheMoon on August 21, 2014, 03:44:23 AM »

Can anyone tell me the start time and location.. It would be my first venture so

not sure how the handicap would work
3
Linux Kernel / Re: ERROR In DNS Configuration
« Last post by ranadastidar on July 31, 2014, 05:03:26 AM »
you have not create your zone file

visit linuxforum.in for dns setup help
4
Linux Servers Support / service vpnserver does not support chkconfig
« Last post by tuxi on July 26, 2014, 05:21:45 PM »
Hi, I am trying to setup vpn server using softether and following this guide : https://www.softether.org/4-docs/1-manual/7._Installing_SoftEther_VPN_Server/7.3_Install_on_Linux_and_Initial_Configurations

Now problem is that when I go to step where I have to add it as server it gives following error:

Code: [Select]
$chkconfig --add vpnserver
service vpnserver does not support chkconfig

I have checked permission of /etc/rc.d/init.d/vpnserver , its as desired.. donno where is the problem , but I can use command :
Code: [Select]
service vpnserver start
5
Hello, I have got an issue which I think I had resolved in past when I asked here. I can't recall where so I am asking again, if anyone knows solution then please let me know.

I am receiving error 500 internal server error on an Apache server.

If I look into apache error logs , I find following lines:
Code: [Select]
Fri Jul 5 21:38:46 2014] [alert] [client 180.76.5.25] /home/usea/public_html/.htaccess: Option FollowSymlinks not allowed here
So, what is the problem here, what I am missing ?

EDIT:

Nevermind, I found the solution, it was .htaccess using old Options +FollowSymlinks

Now it is deprecated, just use : +SymLinksIfOwnerMatch instead of that and problem solved..

So your .htaccess should look like :

Code: [Select]
Options +SymLinksIfOwnerMatch
RewriteEngine on
RewriteCond %{HTTP_HOST} ^.*$
# YOUR more commands goes here..

6
Hi friends, I have a server where I need to set IPv6, I have given IPv6 address as given by provider in
/etc/sysconfig/network-scripts/ifcfg-eth0
But when I restart network, it gives following error:

Code: [Select]
# service network restart
Shutting down interface eth0:                              [  OK  ]
Shutting down interface venet0:  Shutting down interface venet0:
                                                           [  OK  ]
Shutting down loopback interface:                          [  OK  ]
Bringing up loopback interface:                            [  OK  ]
Bringing up interface eth0:  Determining if ip address 218.100.225.61 is already in use for device eth0...
ERROR    : [ipv6_set_default_route] Given IPv6 default device 'eth0' requires an explicit nexthop
                                                           [  OK  ]
Bringing up interface venet0:  Bringing up interface venet0:
Configuring interface venet0:
net.ipv4.conf.venet0.send_redirects = 0
Configuring ipv6 venet0:
                                                           [  OK  ]

This is centos 6.5 with openvz virtulization. And when I use ping to check ipv6:
Code: [Select]
# ping6 ipv6.google.com
PING ipv6.google.com(ord08s09-in-x03.1e100.net) 56 data bytes
64 bytes from ord08s09-in-x03.1e100.net: icmp_seq=1 ttl=53 time=93.2 ms
64 bytes from ord08s09-in-x03.1e100.net: icmp_seq=2 ttl=53 time=93.1 ms
64 bytes from ord08s09-in-x03.1e100.net: icmp_seq=3 ttl=53 time=93.1 ms
64 bytes from ord08s09-in-x03.1e100.net: icmp_seq=4 ttl=53 time=93.2 ms
--- ipv6.google.com ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3367ms
rtt min/avg/max/mdev = 93.141/93.185/93.244/0.308 ms

So IPv6 is working, but then what is that error all about ?
7
Linux Application / Re: Mail messages not getting deleted in one st
« Last post by Ricky on June 04, 2014, 06:35:47 PM »
Most probably you are using Google IMAP, is it ?
Then I guess its the desired behaviour in google now as they need ctrl+E to confirm you action.
8
Other Devices / Re: Partition 1 does not end on cylinder boundary - centos 6.5
« Last post by Ricky on June 04, 2014, 06:26:29 PM »
That is nothing to worry about , you can safely ignore it. If you search aroun on internet, you can fine explanation.

There is a some explanation here
9
In centOS, you need to change run-level,
Edit /etc/inittab and look for line which says

id:5

Change :
that  5 to 3 and don't touch anything else, that will now make your computer to always boot into command line by default.

You can edit file by :

nano /etc/inittab

after you have done changes, ctrl+O to write and Ctrl+X to exit.
10
Hi, I am using one of my computer in office only as server and there is no other use for it, it has not even any monitor  but I found that my server by default boots into graphical mode, so how can I set it that it always boot to command line. What file I need to modify to make it boot to command line.

Also please provide proper procedure.
Pages: [1] 2 3 ... 10