Linux Forums - Linux Help,Advice & support community:LinuxSolved.com
Hardware Troubleshooting in Linux => Linux Audio Support => Topic started by: Gaurav on April 10, 2004, 03:16:33 AM
-
Hi,
I am not able to configure my SBLive card with PCQLinux 2004.
I tried sndconfig also but no success.
Any ideas???
++thanks
Gaurav
-
this is true linux sound prob so it is moved to sound section..
BTW. can u post the out put of cat /proc/pci
-
Thanks for the interest shown.
here you go...
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset Host Bridge (rev 1).
Prefetchable 32 bit memory at 0xf8000000 [0xfbffffff].
Bus 0, device 1, function 0:
PCI bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset AGP Bridge (rev 1).
Master Capable. Latency=32. Min Gnt=8.
Bus 0, device 29, function 0:
USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 1).
IRQ 11.
I/O at 0xe800 [0xe81f].
Bus 0, device 29, function 1:
USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 1).
IRQ 5.
I/O at 0xe880 [0xe89f].
Bus 0, device 29, function 2:
USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 1).
IRQ 9.
I/O at 0xec00 [0xec1f].
Bus 0, device 29, function 7:
USB Controller: Intel Corp. 82801DB USB2 (rev 1).
IRQ 10.
-
is that all ? don't u think something is missing ?
-
There should have been somrthing like this
Bus 1, device 4, function 0:
Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 7).
IRQ 10.
Master Capable. Latency=32. Min Gnt=2.Max Lat=20.
I/O at 0xb800 [0xb81f].
Bus 1, device 4, function 1:
Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 7).
Master Capable. Latency=32.
I/O at 0xbc00 [0xbc07].
Here emu10k1 is the driver for SB live. You can dl it from source forge if you dont have it.
I'm not sure but try adding "alias sound-slot-0 emu10k1" in modules.conf in /etc