Linux Forums - Linux Help,Advice & support community:LinuxSolved.com

Network Troublshooting => Linux Proxy Server Support => Topic started by: bakhtiar on January 03, 2009, 02:53:49 PM

Title: bandwirdth controlling for user
Post by: bakhtiar on January 03, 2009, 02:53:49 PM
first i am thank full to www.linuxsolved.com he registred me free of cost !!!

dear
i have two lan card eth0 and eth1 and installed Redhat 9 and Proxy squid 1 i need to control my office 10 pc almost using high bandwirdth i am intrusted to coltrol all pc under 128/kbps per pc so please solved my issu !!!

Thanks
Bakhtiar (new user)
Title: Re: bandwirdth controlling for user
Post by: Ricky on January 03, 2009, 08:10:46 PM
Welcome to linuxsolved.com Bakhtiar.

Its easy to do that via squid. But first of all I would like to know which squid version you are using as well as is it working now ?

If yes then you need to know about DelayPools
It can set over all per connection bandwidth to 128kbps or whatever you want.
Title: Re: bandwirdth controlling for user
Post by: bakhtiar on January 04, 2009, 02:48:40 PM
Welcome to linuxsolved.com Bakhtiar.

Its easy to do that via squid. But first of all I would like to know which squid version you are using as well as is it working now ?

If yes then you need to know about DelayPools
It can set over all per connection bandwidth to 128kbps or whatever you want.
Dear sir i have use Redhat 9 and useing a bult squid version 1 so please send me complete detail about bandwirdth controlling !!!

Thanks
Bakhtiar
Title: Re: bandwirdth controlling for user
Post by: Ricky on January 04, 2009, 07:08:28 PM
It is easy but may not understand at first.

See my this post : I have given link to my solutions there: Bandiwdth control-limit using squid (http://www.linuxsolved.com/linux-forums/linux-proxy-server-support/bandwidth-limit-using-squid-t2942.0.html)
Title: Re: bandwirdth controlling for user
Post by: bakhtiar on January 09, 2009, 12:14:23 PM
dear i understand but i can click your provided link show me the message 404 error and not avaliable so please provide me current link....... thanks

Bakhiar
Title: Re: bandwirdth controlling for user
Post by: Ricky on January 09, 2009, 07:54:26 PM
I have reactified the link, you may now see it.
Title: Re: bandwirdth controlling for user
Post by: bakhtiar on January 16, 2009, 03:44:14 PM
Dear Bro.

i have installed linux Redhat 9 and installed bulted squid version 1.1 i think this is working properly with proxy sir i need two requirement No.1 Bandwirdth Limit Every Users and No.2 Mac/IP Base Blocking Users so please Guide me Step by Step Configuration,

Thanks
Bakhtiar
Title: Re: bandwirdth controlling for user
Post by: Ricky on January 16, 2009, 06:08:37 PM
You should see this:
quark.humbug.org.au/publications/squid/aclsquid.html
Title: Re: bandwirdth controlling for user
Post by: bakhtiar on January 20, 2009, 04:31:58 PM
i have search to /usr/bin/Req_auth if you give mr but some directory not heare this location so guide me i am installed Redhat 9 and Squid 1.1 on bulted if any other version some Requirment so give me !!!

Help me i am too late....
Bakhtiar
Title: Re: bandwirdth controlling for user
Post by: Ricky on January 20, 2009, 06:45:33 PM
You can search for particular location using "locate" command.

eg.
Code: [Select]
locate Req_auth
Title: Re: bandwirdth controlling for user
Post by: bakhtiar on February 01, 2009, 12:42:04 PM
sir please guide me how i can use the fedora version then solved my bandwirdth controlling / login-passworld for claient end base please please i can too later waiting a long period...

bakhtiar
Title: Re: bandwirdth controlling for user
Post by: Lajuar on June 20, 2009, 07:46:00 AM
Below is configuration for bandwidth binding parameter

delay_pools 1
delay_class 1 1

delay_access 1 allow home_networks
delay_access 1 deny all
delay_parameters 1 625/15000

625 bytes minimum limit for bandwidth and 15000 bytes is maximum limit

Regards
Sayyed Sarfraz